2 - 1
Section G Brakes
9803/7130
Section G
2 - 1
Issue 1
Technical Data
System Type Hydraulic service brakes in rear axle only, operated from seperate pedals. No
servo assistance. Independant cable operated parking brake on output to
front wheels.
Service Brakes
Type JCB Oil-Immersed Multi-Plate Discs
Actuation Hydraulic
Location Rear Axle Centre Casing (2 brake packs)
Friction Plates (5 per brake pack)
Outside Diameter 165 mm (6.496 in) nominal
Inside Diameter 103 mm (4.055 in) nominal
Hydraulic Piston Diameter 166 mm (6.535 in)
Master Cylinder
Number of Cylinders 2
Type Compensated master cylinder
Piston Diameter (each) 22.22 mm (0.875 in)
Parking Brake
Type Disc Brake, Manually Adjusted Caliper
Actuation Cable operated
Location Mounted on transmission output to the front wheels
Disc Diameter 279.4 mm (11 in)
Note: Because the service brakes are located in the rear axle, instructions for dismantling and assembly are shown in
Section F Rear Axle Brakes.
To Next Page
Loading...
Need help?
General
