jcb 2CX - Section F Transmission Section F

i
Section F Transmission
9803/7130
Section F
i
Issue 1
Service Tools
Axles 1 - 1
Syncro Shuttle Gearbox 1 - 4
Technical Data
Wheels and Tyres 2 - 1
Front and Rear Axle 2 - 2
Syncro Shuttle Gearbox 2 - 2
Torque Converter 2 - 3
Basic Operation
Syncro Shuttle Gearbox 3 - 1
- Component Identification 3 - 2
- Power Take Off (If Fitted) 3 - 3
- Component Identification 3 - 4
- Hydraulic and Electrical Operation 3 - 5
Systems Description
Synchro Shuttle Gearbox
- Synchromesh - Operation 6 - 1
- Forward/Reverse Clutch - Operation 6 - 3
Fault Finding
Syncro Shuttle Gearbox
- Hydraulic 10 - 1
- Mechanical 10 - 3
- PTO 10 - 6
Service Procedures
Front and Rear Axle
- Renewing the Pinion Oil Seal 20 - 1
- Brakes - Testing for Piston Seal Leakage 20 - 2
Syncro Shuttle Gearbox
- Pressure and Flow Tests 21 - 1
Solenoid Valve
- Dismantling and Assembly 21 - 7
Torque Converter
- Stall Test 22 - 1
Propshafts
Removing and Replacing 30 - 1
Front Axle
Removal and Replacement 40 - 1
Drive Head Maxtrac
- Dismantling and Assembly 41 - 1
- Pinion Depth Setting 41 - 7
- Collapsible Spacer Assembly 41 - 8
- Crownwheel and Pinion Meshing 41 - 9
Contents Page No.
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
www.maskinisten.net
MAIN CONTENTS