jcb 514-56 Service Manual

SERVICE MANUAL
LOADALL (ROUGH TERRAIN
VARIABLE REACH TRUCK)
506-36, 507-42, 509-42, 510-42,
510-56, 512-56, 514-56, 516-42
EN - 9813/5050 - ISSUE 2 - 08/2017
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2017 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
www.jcb.com
Foreword
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
explain it.
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
Contents
01 - Machine
03 - Attachments, Couplings and Load
Handling
06 - Body and Framework
09 - Operator Station
12 - Heating, Ventilating and Air-
Conditioning (HVAC)
15 - Engine
18 - Fuel and Exhaust System
21 - Cooling System
24 - Brake System
25 - Steering System
27 - Driveline
30 - Hydraulic System
33 - Electrical System
72 - Fasteners and Fixings
75 - Consumable Products
78 - After Sales

jcb 514-56 Specifications

General

Brand	jcb
Model	514-56
Category	Front End Loaders
Language	English

Summary

Foreword

The Operator's Manual

Introduction to the operator's manual and its importance.

Engine Belt System

00 - General Engine Belt Information

Covers introduction, health and safety, and component identification for engine belts.

03 - Drive Belt Procedures

Details drive belt introduction, health and safety, checks, adjustment, and removal/installation.

21 - Belt Tensioner Service

Explains tensioner removal and installation procedures.

Engine Oil Filter Service

00 - General Oil Filter Information

Covers health and safety, component identification, operation, and checking the oil level.

21 - Oil Filter Replacement

Details the remove and install procedure for the oil filter.

Engine Air Filter Maintenance

00 - General Air Filter Information

Covers introduction, health and safety, and condition checks for the air filter.

24 - Air Filter Replacement

Details the remove and install procedure for the air filter.

Engine Crankcase Ventilation System

00 - General CCV System Introduction

Explains the CCV system introduction.

27 - Crankcase Ventilation Filter Service

Covers component identification and remove/install procedure for the filter.

Engine Valve System

00 - General Valve System Introduction

Describes the valve train system introduction.

30 - Valve Technical Data

Provides technical data for inlet and exhaust valves.