The rear axle serial number is stamped on a plate mounted
to the front face of the axle, as shown below.
The front axle serial number is stamped on a plate mounted
to the rear face of the axle, as shown below.
Unit Identification
The engine serial number is stamped on a plate mounted on
the left hand side of the cylinder block (looking towards the
front of the machine).
The Syncro Shuttle serial number is stamped on a label
which is mounted to the rear face of the unit.
1 - 2
Section 1 General Information
9803/7130
Section 1
1 - 2
Issue 1
S181760
S181770
S175510
S175520
To Next Page
Loading...
Need help?
General
