jcb 516-40 - Page 10

Section 1 - General Information
Introduction
Identifying Your Machine
1-5 1-5
9813/4600-1
The machine is built to the ROPS standard and has a data
plate attached to the frame.
For an example of the ROPS data plate, refer to
K
Fig 6. ( T 1-5).
C090690
Fig 6.
SERIAL No:
YEAR:
ROPS:
COMPLIES TO
EN ISO 3471:2008
333/P2846
515-40
CAB PART No:
332/W1466
J.C.B. CAB SYSTEMS
LAKESIDE WORKS
ROCESTER
UTTOXETER, STAFFS
ST14 5JP
ENGLAND
FOPS:
COMPLIES TO
EN ISO 3449:2008
LEVEL 1
MAXIMUM UNLADEN
MASS 5000kg.