06 - Body and Framework
06 - Moveable Panel and Cover
06 - Engine Compartment
06 - 4 9813/7750-1 06 - 4
06 - Engine Compartment
Introduction
Most of the service points can be access through the
engine compartment cover.
Open
1. Make the machine safe.
2. Park the machine on firm level ground.
3. Apply the parking brake (if installed).
4. Engage the articulation lock.
5. Stop the engine and turn the ignition key to the
off position.
6. Remove the ignition key.
7. Unlock the latch connected to down left and right
side of engine cover. Refer to Figure 6.
8. Use the handle to open the engine cover.
9. Open the cover, it is supported on the retainer
rope.
10. Install the stay rod to prevent the bonnet from
closing. Refer to Figure 6.
Figure 6.
A Latch B Handle
C Retainer rope D Stay rod
To Next Page
Loading...
