About the Product
Description
9 9831/4600-3 9
• Work on a subgrade having a gradient greater than the permissible gradient.
• Work on the edges of hillsides or trenches.
• Work in regions having continuous construction site traffic.
Additional safety measures can be:
• Securing by means of ropes attached to winches or accompanying heavy construction vehicles.
• Adequate escape lanes.
• Appointment of guides.
• Testing the function of the brakes when first driving onto the gradient at the lower end of the gradient
• Correspondingly: testing the directional stability of the longitudinal axis of the roller when switching on
the vibration.
The manufacturer/supplier is not liable for damage resulting from such use. The user alone bears the risk.
If the machine is to be used in applications where there is a high silica concentration, risk due to materials
containing asbestos or similar environment based hazards, additional protective measures such as the use
of PPE may be required.
The machine should not be operated by any person who does not have an appropriate level of qualification,
training or experience of use of this type of machine.
Prior to use of the machine, its suitability (size, performance, specification etc.) should be considered with
regards to the intended application and any relevant hazards that may exist. Contact your JCB dealer for
support in determining the appropriate JCB machine, attachment and any optional equipment that is suitable
for the application and environment.
Danger Zone
The danger zone includes the area in immediate proximity to any hazardous moving parts and also the machine
normal stopping distances and areas into which the machine can quickly turn under normal conditions of use.
During the operation of the machine, keep all persons out of the danger zone. Persons in the danger zone
could be injured. Refer to: Technical Data (Page 155).
Before you do a maintenance task, make the machine safe. Refer to: Maintenance Positions (Page 100).
To Next Page
Loading...
Need help?
General
