jcb JZ 70 - Greasing; Slew Ring Teeth and Slew Pinion; Slew Ring Bearing



Routine Maintenance






        




           Fluids
and Lubricants - Capacities and Specifications.
Slew Ring Teeth and Slew Pinion
        

        Component
Locations 
1 Make the Machine Safe

2 Grease the Slew Ring
a A B
b C
3 Slew the Machine

        

      

4 Refit the Cover
B A
Slew Ring Bearing
D

WARNING
You will be working close into the machine for these
jobs. Lower the attachments if possible. Remove
starter key and disconnect the battery. This will
prevent the engine being started.


