Section F - Transmission
Track Motor
Dismantling and Assembly
F - 44 F - 44
9803-6030
Fig 96.
d Assemble the o-ring seal 97-A into its seat on the
plug 97-B. Insert the shims 97-C into the plug in
the same order that they were removed.
Fig 97.
e Screw the plugs 98-A into the relief valve housing.
Fig 98.
f By using a torque wrench, tighten the plugs 99-A
at 170 +/- 10 Nm.
Fig 99.
g Assemble the o-ring seals 100-A, 100-B into their
seats in the valve housing 100-C.
To Next Page
Loading...
