Routine Maintenance
Service Schedules
98 98
9811/5700-7
Beacon - Operation (if fitted) - Check
Heater - Operation - Check
Warning Lights/Audible Alarm - Check
Lights and Instruments - Check
Operational Lights - Check
Horn - Operation - Check
Reverse Alarm - Check
All Other Equipment (as fitted) - Check
BODYWORK AND CAB
Teeth and Side Cutters (if fitted) - Check Security
Glazing for Correct Fit - Check
Doors and Hinges - Fitment/Leaks - Check
Locks and Keys - Check
ATTACHMENTS
Attachment Operation - Check
Circuit Pressures - Check
LIFTING EQUIPMENT
Fit for Purpose Test
(4)
- Complete
(1) First 100 Hours Service only, to be completed by your JCB Distributor.
(2) Jobs which should only be done by a specialist.
(3) Fully raise and lower the mast daily to lubricate the cylinder bores and cylinder rods.
(4) This may be required every six months or at least annually in some countries to meet and comply with legislation and
for insurance purposes.
Operation 10 50
100
(1)
500 1000 2000 6000
To Next Page
Loading...
