Routine Maintenance
Transmission
154 154
9811/5700-7
Changing the Axle Oil
1 Make the machine safe with the mast lowered. Refer
to Prepare the Machine for Maintenance.
2 Place a container of suitable size beneath plug B to
catch the oil. Remove the drain plug B and its seal.
Allow oil to drain out. The drain plug is magnetic.
Wipe it clean. (Metallic particles should be carefully
removed). Fit drain plug B and its washer.
!MCAUTION
Oil will gush from the hole when the drain plug is
removed. Keep to one side when you remove the plug.
2-3-4-2
3 Fill with recommended oil through fill/level hole A.
Clean and refit plug A and its seal. Tighten to 79Nm
(60lbf ft).
Fig 119.
Fig 120.
To Next Page
Loading...
