4
TH32006
Instruction & User Manual
m To avoid any risk of being crushed or
sustaining other injuries: NEVER work on,
under or around a load supported only by
a jack. ALWAYS use adequately rated jack
stands.
m Be sure all tools and personnel are clear
before lowering load. No alterations shall be
made to this device. Only attachments and/
or adaptors supplied by the manufacturer
shall be used. Only lift the vehicle using
the jacking points specified by the vehicle
manufacturer.
m This product should not be used under
harsh conditions (e.g. extreme climates,
applications in freezing conditions, with
powerful magnetic fields). The product’s life
is five years. Using this product to lift people
is prohibited. Handling loads could cause
hazardous situations (e.g. molten metals,
acids, radioactive materials and especially
fragile loads) is prohibited. If the product is
no longer serviceable it must be destroyed.
m The product must not come into direct
contact with foodstuffs. The product must
not be used on-board ships. The oil level
must never overflow its housing. In case of
accident or failure, seizure may occur.
m The operator needs to be able to see
the lifting mechanism and the load during
movements. No work is allowed under
lifted loads, until the load is properly
strapped down again using suitable means.
m All of the necessary information must be
provided to the operator. When refilling
the hydraulic system, ensure that the
specifications of the hydraulic fluid used
in the jack and the level of the fluid are as
stated by the manufacturer.
m Study, understand, and follow all instructions
provided with and on this device. Do not
exceed rated capacity. This is a lifting device
only. After lifting, immediately transfer the
load to appropriately rated jack stands.
Never work on, under, or around a load
supported by this device. Use only on hard,
level surfaces capable of supporting the load
marked on the equipment. Do not move or
dolly loads with this device. Failure to heed
this warning may result in personal injury
and/or property damage.
SAVE THESE
INSTRUCTIONS
For your safety, read, understand, and follow
the information provided with and on this jack.
The owner and operator of this equipment
must have an understanding of this jack and
safe operating procedures before attempting to
use. The owner and operator must be aware
that use and repair of this product may require
special skills and knowledge. If any doubt exists
as to the safe and proper use of this jack,
remove from service immediately. Inspect
before each use. Do not use if broken, bent,
cracked, or damaged parts (including labels) are
noted. Any jack that appears damaged in any
way, operates abnormally or is missing parts,
shall be removed from service immediately. If
the jack has been, or suspected to have been,
subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately
discontinue use and remove from service. It
is recommended that an annual inspection be
done by qualified personnel.
WARNING!
To Next Page
Loading...