the number that has been set up. If speed dial has not been set for the number key
you long pressed, the mobile phone will hint “No speed dial number”.
2.2 Answer a call
2.2.1 Answering new call
Press to answer when there is new call
2.2.2 Adjust volume
You can adjust voice volume by using up/ down key during conversation.
2.2.3 Hand Free
Press right soft key to choose “Hand free”, you can switch conversation between
receiver and speaker
2.2.4 End a Call
Press or right soft key to refuse calls
2.2.5 Connecting two calls at the same time.
Active option, and you can operate as below: Swap: switch call
Conference：making conference call（network support is required）
End single call: hang up the current call.
End all calls: hang up all the current calls.
Transfer (network support is required): transfer the current call to your designated phone
number.
New call: input new phone number to dial.
Phonebook: enter the phonebook interface.
Messages: edit the message to send it.
Sound recorder：can record and save the current call.
Silence: Open Silence mode, the caller can’t hear any sound at your side.
DTMF: on/off settings can be conducted. If the function is activated, when calling the
telephone exchange, you can call the extension in accordance with voice clews; the aforesaid
functions are unavailable if the function is off.
“Connecting and preset Bluetooth Headset”：Switch on Bluetooth→search handsfree
device →pairing→Preset to Bluetooth headset device； choose“connecting and preset
Bluetooth headset”during calling then can realize handsfree communication. Details as per
the Bluetooth menu.
Conference call
Hold conf. call: hold the current call with members of the conference, then others cannot hear
your voice; and the option of Hold conf. call changed to Retrieve conf. call, select it and you
can recover normal conference call.
Split: separate the selected member from the conference call.
To Next Page
Loading...
Need help?
General
