② YELLOW LED – Indicates there is a possible problem. A “Pending”
DTC is present and/or some of the vehicle's emission monitors
have not run their diagnostic testing.
③ GREEN LED – Indicates that engine systems are running normally
(The number of monitors on the vehicle which are active and
performing their diagnostic testing is in the allowed limit, and no
DTCs are present).
④ RED LED – Indicates there is a problem in one or more of the
vehicle's systems. The red LED is also used to show that DTCs are
present. DTCs are shown on the Scan Tool's display.In this case,
the MIL lamp on the vehicle’s instrument panel will light steady on.
⑤ LCD DISPLAY – Indicates test results.
⑥ IM BUTTON – I/M Readniess function.
⑦ UP BUTTON – Scrolls up through menu items.
⑧ EXIT BUTTON – EXIT function screen.
⑨ ENTER BUTTON – Enter function screen.
⑩ DOWN BUTTON - Scrolls down through menu items.
• Specifications
1) Display: 2.4 inch TFT color display
2) Operating Temperature: 0 to 60°C (32 to 140 F°)
3) Storage Temperature: -20 to 70°C (-4 to 158 F°)
4) External Power: 8.0 to 18.0 V power provided via vehicle battery
To Next Page
Loading...
Need help?
General