RM3 SERIES BACKREFLECTION METER
USER’S MANUAL
10112341 Rev 002 Page 14 of 39
• User-calibration mode
• RS232 serial and IEEE 488 GPIB parallel interface
• Convenient data logging via serial port to a computer or serial printer
• Direct display of measured backreflection, power, or insertion loss
Applications
• Connector backreflection and loss testing
• Component testing
• Installation verification
• Quality assurance (QA) acceptance testing
Standard Accessories
• AC power cord (country specific)
• Laser sources specified when ordered
• FC/PC-FC/APC or SC/PC-SC/APC hybrid measurement jumper
• FC/PC-FC/APC or SC/PC-SC/APC hybrid calibrated jumper
• FC-type (or SC-type) detector adapter
• Detector cap
• Foot pedal
• MCTS software and user’s manual
• User’s manual
• Carrying case (for field use)
• Certificate of Compliance (NIST Traceability Report available on request)
Optional Accessories
• Variety of detector adapters
• Measurement jumpers with various user-selected connectors
• RS232-to-GPIB converter
To Next Page
