Need help?Do you have a question about the JDS Uniphase ORL-55 Series and is the answer not in the manual?
General| Model | ORL-55 Series |
|---|---|
| Category | Measuring Instruments |
| Manufacturer | JDS Uniphase |
| Type | Optical Return Loss Meter |
| Wavelength Range | 1310 nm, 1550 nm |
| Return Loss Accuracy | ± 0.5 dB |
| Resolution | 0.01 dB |
| Optical Power Accuracy | ± 0.5 dB |
| Source Type | Laser Diode |
| Dynamic Range | 55 dB |
| Accuracy | ± 0.5 dB |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 70 °C |
| Optical Power Range | -60 to +10 dBm |
| Interfaces | RS-232 |
Overview of the handheld ORL-55 Test Sets, their function, and design.
Explains the meaning of the CAUTION symbol and its associated warnings.
Details dangerous laser radiation, precautions, and Class 1 laser product classification.
Warns about explosion danger with dry batteries and short-circuiting.
Covers ambient temperature, ventilation, and condensation hazards.
Visual identification of the ORL-55 front and side view components.
Lists available power sources and instructions for replacing batteries.
Details on using dry and rechargeable batteries, including explosion warnings.
How to power the ORL-55 using the AC adapter and fitting plug adapters.
Instructions on switching the device on, off, and changing power modes.
Explains the three measurement modes: Laser Source, Power Meter, Return Loss Test.
How to switch Auto-λ mode on/off for automatic wavelength identification.
Restoring the device to its original factory settings.
Steps to download and install the latest firmware for the device.
How to normalize the unit for high measurement accuracy.
Procedure for cleaning optical connections to ensure measurement accuracy.
Technical specifications for the Laser Source, including safety and output power.
Technical specifications for the Power Meter function.
Technical specifications for the Return Loss Test function.
To Next Page
