8 ORL-55 JDSU
3 G
ETTING STARTED
3 GETTING STARTED
Unpacking the device
Packing material
We suggest that you keep the original packing material.
It is designed for reuse (unless it is damaged in transit).
Using the original packing material is your guarantee of
protecting the device during transit.
Checking the package contents
Your return loss meter is shipped with the following
accessories:
• 1 adapter BN 2150/00.xx
• 4 dry batteries, AA size
• Belt bag MT-1S
• Operating manual
Checking for damages in transit
After you unpack the device, check to see whether it was
damaged in transit. This is particularly likely if the
packaging is clearly damaged. If there is damage, do not
attempt to operate the device. Doing so can cause
further damage. In case of damage, please contact your
local JDSU Sales Company. Addresses can be found at
www.jdsu.com.
Recovery following storage/shipping
Condensation can occur if a device that is stored or
transported at a low temperature is brought into a warm
room. To avoid damages, wait until no more
condensation is visible on the surface before powering
up the device. Do not operate the device until it has
reached its guaranteed temperature range (see
„Ambient temperature” on page 71). This also applies if
the device is stored at a high temperature.
To Next Page
Loading...
Need help?
General
