JDSU ORL-55 41
6 M
EMORY MANAGEMENT
Fig. 12 Display if selected memory location is already occupied.
Press [MENU ENTER] to overwrite data with new
data.
Press [PREV] if you do not want to overwrite existing
data.
Displaying stored results
Displaying the last measurement results stored is
probably the function you will use the most often. For this
reason, the last memory location used will be displayed
when you enter the MANAGE MEMORY menu. The
Meas # is highlighted by default so you have quick
access to all the measurements of a certain Group.
To display the last results stored:
Select Manage Memory in the MAIN menu.
The last results stored are displayed.
Stored results example: Group 025, Meas 004:
3 wavelengths detected, relative measurement mode
with measured levels and reference values.
To Next Page
Loading...
Need help?
General
