JDSU ORL-55 45
4. Press [PREV] to exit from the menu.
Note: If you now store results, they will be stored at the
memory location for the cleared Meas # of the last Group
displayed.
To clear all the data of a Group
1. Set the Group # that you want to clear.
2. Press [] to select Clear Group.
3. Press [MENU ENTER] to clear all the Meas data for
the selected Group #.
4. Press [PREV] to exit from the menu.
Note: If you now store results, they will be stored at
memory location Meas 001 of the last Group displayed.
To clear the entire memory:
1. Press [] to select Clear All.
2. Press [MENU ENTER] to clear all memory data.
3. Press [PREV] to exit the menu.
Note: If you now store results, they will be stored at
memory location Group 001 and Meas 001.
Reading out the result memory
The result memory can be read out in two ways:
• by reading the measurement results to a PC or
• by copying the result memory to a memory stick.
Reading out the measurement results
to a PC
The OFS-355 Download Manager can be used to
transfer the result memory to a PC via the USB interface.
For further details see „OFS-355 Download Manager” on
page 66.
To Next Page
Loading...
Need help?
General
