Tap right to select the Latency. Make sure that
Number of Trials -> 1
Trial Dur. -> 120 sec
Show Pass/Fail -> No
Tap right to select the Jitter. Make sure that
Number of Trials -> 1
Trial Dur. -> 120 sec
Show Pass/Fail -> No
Tap right to select the Frame Loss. Make sure
that
Test Procedure -> RFC 2544
Trial Dur. -> 60 sec
Test Granularity -> 10 Mbps
Next press the home key. Then select Restart.
Now select the Action key and then select Start
Traffic
.
The RFC 2544 test will automatically run through
all of its tests and save results to the unit. A bar
at the top will diplay the minimum time
remaining for the test to be completed.
To Next Page
Loading...
