Display
After pressing the “Display” button on the touchscreen
the following settings will be available.
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, select from
“Day,” “Night” or “Auto” until a check-mark appears
next to the setting, showing that setting has been se-
lected.
NOTE: When Day or Night is selected for the Display
Mode, the usage of the Parade Mode feature will cause
the radio to activate the Display Brightness Day control
even though the headlights are on.
• Display Brightness With Headlights ON
When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the “+” and
“–” setting buttons on the touchscreen or by selecting any
point on the scale between the “+” and “–” buttons on the
touchscreen.
NOTE: To make changes to the ⬙Display Brightness with
Headlights ON⬙ setting, the headlights must be on and
the interior dimmer switch must not be in the ⬙party⬙ or
⬙parade⬙ positions.
• Display Brightness With Headlights OFF
When in this display, you may select the brightness with
the headlights off. Adjust the brightness with the “+” and
“–” setting buttons on the touchscreen or by selecting any
point on the scale between the “+” and “–” buttons on the
touchscreen.
NOTE: To make changes to the ⬙Display Brightness with
Headlights OFF⬙ setting, the headlights must be off and
the interior dimmer switch must not be in the ⬙party⬙ or
⬙parade⬙ positions.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 399
To Next Page
Loading...
