Chassis
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission
(CVT) – If Equipped
We recommend you use MOPAR® CVTF+4® Continuously Variable Transmission
Fluid.
Manual Transmission –
If Equipped
We recommend you use MOPAR® ATF+4® Automatic Transmission Fluid.
Rear Drive Assembly (RDA) We recommend you use MOPAR® Gear & Axle Lubricant SAE 80W-90 API GL 5.
Power Transfer Unit (PTU) We recommend you use MOPAR® Gear & Axle Lubricant SAE 80W-90 API GL 5.
Brake Master Cylinder We recommend you use MOPAR® DOT 3, SAE J1703 should be used. If DOT 3,
SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
Power Steering Reservoir We recommend you useMOPAR® Power Steering Fluid +4, MOPAR® ATF+4®
Automatic Transmission Fluid.
482 MAINTAINING YOUR VEHICLE