GETTING TO KNOW YOUR INSTRUMENT PANEL 71
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
Distance Setting Change
System Cancel
Driver Override
System Off
ACC Proximity Warning
ACC Unavailable Warning
NOTE:
The instrument cluster display will return to the
last display selected after five seconds of no
ACC display activity Ú page 106.
LaneSense — If Equipped
The instrument cluster display displays the
current LaneSense system settings. The
information displayed depends on LaneSense
system status and the conditions that need to
be met Ú page 120.
Trip Info
Push and release the up or down arrow
button until the Trip menu title is displayed in
the instrument cluster display. Toggle the
left or right arrow button to select Trip A
or Trip B. The Trip information will display the
following:
Distance – Shows the total distance (mi or
km) traveled for Trip A or Trip B since the last
reset.
Average Fuel Economy – Shows the average
fuel economy (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.
Elapsed Time – Shows the total elapsed time
of travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Stop/Start – If Equipped
Push and release the up or down arrow
button until the Stop/Start menu title is
displayed in the instrument cluster display.
Audio
Push and release the up or down arrow
button until the Audio menu title is displayed in
the instrument cluster display.
Stored Messages
Push and release the up or down arrow
button until the Messages Menu Icon is
highlighted in the instrument cluster display.
This feature shows the number of stored
warning messages. Pushing the left or
right arrow button will allow you to scroll
through the stored messages.
Screen Setup
Push and release the up or down arrow
button until the Screen Setup Menu Icon/Title is
highlighted in the instrument cluster display.
Push and release the OK button to enter the
submenus and follow the prompts on the
screen as needed. The Screen Setup feature
allows you to change what information is
displayed in the instrument cluster as well as
the location that information is displayed.
3
21_MP_OM_EN_USC_t.book Page 71
To Next Page
Loading...
