TECHNICAL SPECIFICATIONS 179
CHASSIS FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Manual Transmission – If Equipped We recommend you use Mopar® C Series Manual & Dual Dry Clutch Transmission Fluid.
Automatic Transmission 6 Speed (FWD Models) –
If Equipped
Use only Mopar® AW-1 Automatic Transmission Fluid or equivalent. Failure to use the correct
fluid may affect the function or performance of your transmission.
Automatic Transmission 7 Speed DDCT – If
Equipped
Gearbox: Use only Mopar® C Series Manual & Dual Dry Clutch Transmission Fluid or equivalent.
Control System: Use only Mopar® C Series DDCT SAE 75W Hydraulic Fluid or equivalent.
Failure to use the correct fluid may affect the function or performance of your transmission.
Automatic Transmission 9 Speed (4WD Models) –
If Equipped
Use only Mopar® ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use
the correct fluid may affect the function or performance of your transmission.
Power Transfer Unit (PTU) – If Equipped
We recommend you use Mopar® Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API
GL-5).
Rear Differential (RDM) – If Equipped
We recommend you use Mopar® Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 (API
GL-5).
Brake Master Cylinder
We recommend you use Mopar® DOT 4. If DOT 4 brake fluid is not available, then DOT 3 is
acceptable.
If using DOT 4 brake fluid, the fluid must be changed every 24 months regardless of mileage.
21_M6_EIG_EN_IN_t.book Page 179
To Next Page
Loading...
