IN CASE OF EMERGENCY 85
(Continued)
Tool Kit Bag — If Equipped
1. Open the liftgate.
2. Lift the access cover using the load floor
handle.
Load Floor Handle
3. Remove the alignment pin from the middle,
rotate the jack counterclockwise, and lift it
from the foam tray.
4. Remove the jack and wheel bolt wrench.
JACKING INSTRUCTIONS
3 — Tool Kit Bag
4 — Tow Hook
5 — Wheel Bolt Wrench
6 — Emergency Funnel
7 — Screwdriver
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the jack
parts and the spare tire in the places
provided. Have the deflated (flat) tire repaired
or replaced immediately.
WARNING!
Carefully follow these tire changing warnings
to help prevent personal injury or damage to
your vehicle:
Always park on a firm, level surface as far
from the edge of the roadway as possible
before raising the vehicle.
Turn on the Hazard Warning Flashers.
21_M6_EIG_EN_IN_t.book Page 85
To Next Page
Loading...
Need help?
General
