To Next Page
A
Alison VaughnAug 7, 2025
What does E05 mean on my Jeep JUC AS Scooter?
- DdallisonAug 7, 2025
If your Jeep Scooter displays error code E05, it indicates low voltage protection. Recharge the battery.
What does E05 mean on my Jeep JUC AS Scooter?
If your Jeep Scooter displays error code E05, it indicates low voltage protection. Recharge the battery.
What does error E14 mean on Jeep Scooter?
If your Jeep Scooter displays error E14, it means there is an accelerator sensor error. Check the sensor and wiring.
What does error E10 mean on my Jeep Scooter display?
If your Jeep Scooter displays error E10, check the connection between the display and the controller.
Why does my Jeep Scooter battery not charge or switch on?
If your Jeep Scooter's battery isn't charging or the device won't turn on, first ensure the power supply connector is properly connected. Then, fully charge the battery. If these steps don't resolve the issue, the charger may need replacing, or there could be connection problems, a disconnected battery (on models with removable batteries), a low battery, or a damaged battery.
Why is the motor not running on my Jeep JUC AS?
If the motor of your Jeep Scooter isn't running, it indicates an electrical issue or an error code is present.
What to do if my Jeep Scooter motor stops while running?
If the motor of your Jeep Scooter stops while it's running, it could be due to motor overheating or the presence of an error code. Stop the vehicle and wait for it to cool.
Why does the drive wheel not turn on my Jeep JUC AS Scooter?
If the drive wheel of your Jeep Scooter isn't turning, it could be due to problems with the brakes or a blocked motor. Adjust the brakes and check that the wheel is properly tightened and turns freely without starting the vehicle.
General
