MULTIMEDIA 243
TMC Route Mode (If Equipped)
Press this button to change how the Traffic Message Channel (TMC)
Route Mode functions during route guidance. Select from:
Automatic
By Delay Time
Manual
Off
TMC Avoidance Types (If Equipped)
Press this button to display the available Traffic Message Channel (TMC)
Avoidance Types you would like displayed while in route guidance. Press
and release the desired selection button until a check mark appears,
showing the setting has been selected.
Signposts
Press this button to display the Signposts types you would like displayed
while in route guidance. Press and release the desired selection button
until a check mark appears, showing the setting has been selected.
Route Progress Bar
Press this button to display the Route Progress Bar while in route
guidance. Press and release the selection button until a check mark
appears, showing the setting has been selected.
Route Options
Press this button to determine which road types are OK to travel on while
in route guidance. Press and release the desired selection button until a
check mark appears, showing the setting has been selected.
Highway Mode
Press this button to activate Highway Mode. Selectable options are “On”
and “Off”. Having this setting on will allow you to select the setting
“Highway Services”.
5
21_BV_OM_EN_USC_t.book Page 243
To Next Page