92 GETTING TO KNOW YOUR VEHICLE
5. Open the swing gate all the way to ensure
clearance of the rear window glass. Lift the
rear window glass.
Step Five
6. Locate the wire harness and washer hose
on the left rear inside corner of the vehicle.
Step Six
7. Release the locking tab by pushing it
downward.
Step Seven
8. To remove the wiring harness, push the tab
inward while pulling downward to
disconnect.
Step Eight
Step Eight
9. To remove the washer hose, push the
release button on hose connector, and pull
downward.
Step Nine
21_JL_OM_EN_USC_t.book Page 92
To Next Page
Loading...
