To Next Page

To Previous Page

Model 302 Stereo Power Amplifier SpecificationsModel 302 Stereo Power Amplifier Specifications

Output Power:

Continuous RMS watts, both channels driven

@ 8 ohms

@ 4 ohms

Power Bandwidth:

Peak Output Current:

Dynamic Range:

THD + Noise, 0.1W-500W/4 ohm:

CCIF Intermodulation Distortion, 19/20 kHz:

Damping Factor @ 1kHz:

Overall Gain:

(Balanced or Unbalanced)

Input Impedance:

Common Mode Rejection Ratio:

Absolute Phase:

Inputs:

Outputs:

Power Consumption:

Standby Switch OFF

Standby Switch ON (idle)

Maximum

Amplifier Weight:

Shipping Container Dimensions:

Shipping Weight:

Output Power:

Continuous RMS watts, both channels driven

@ 8 ohms

@ 4 ohms

Power Bandwidth:

Peak Output Current:

Dynamic Range:

THD + Noise, 0.1W-500W/4 ohm:

CCIF Intermodulation Distortion, 19/20 kHz:

Damping Factor @ 1kHz:

Overall Gain:

(Balanced or Unbalanced)

Input Impedance:

Common Mode Rejection Ratio:

Absolute Phase:

Inputs:

Outputs:

Power Consumption:

Standby Switch OFF

Standby Switch ON (idle)

Maximum

Amplifier Weight:

Shipping Container Dimensions:

Shipping Weight:

300 watts.

500 watts.

5 Hz - 60 kHz, -3 dB.

>45 Amps.

117 dBA.

<.05%, typically .006 @ 1kHz.

<.002%.

275.

Selectable Internal Jumper,

26 or 32 dB.

40k ohms.

>90dB, 20 Hz - 20 kHz

Non-inverting, Pin 3 Positive.

User Selectable,

2 x Balanced XLR

2 x Unbalanced RCA.

2 Pairs Parallel Binding Posts

per Channel.

45 watts.

55 watts.

1200 watts.

95 lbs./43 kg.

27” (L) x 21” (W) x 16” (H)/

68 cm (L) x 54 cm (W) x 41 cm.

103 lbs./47 kg.