JEFF ROWLAND 501 - Product Features

© Jeff Rowland design gRoup 2007. all Rights ReseRved.
3
• XLR input connector for balanced
system congurations. Same gain
and input impedance characteristics
are ensured whether XLR or RCA
adapted inputs are used.
• Transformer coupled input provides
universal compatibility with other
components and eliminates ground
loop noise and EMI.
• High efciency ICEpower® power
conversion technology generates
high output power with very little heat,
promotes long component life and
permits a relatively small physical size.
• Multistage AC line ltering in power
supply reduces AC line noise pollution
throughout amplier signal circuitry.
• CE approved speaker output terminals
require no tools for secure, low resis-
tance connections.
• Fully-balanced topology implemented
in both input and output circuitry.
• Proprietary switch-mode power
supply technology ensures
consistent performance under all
operating and AC line conditions.
• Low power consumption permits
constant power-up operation to
eliminate warm-up time.
• Selectable overall gain of 26 or 32 dB.
• Ultra-low resonance, structurally
rigid chassis, precision-machined
from a solid block of aircraft grade
6061-T6 aluminum.
• Remote ON/OFF input jack allows
amplier standby operation from
a
remote source for inclusion into
home
theater (A/V) systems.
PRODUCT FEATURES
OWNER’S MANUAL MODEL 501 MONO AMPLIFIER