Remote Control Features
A The six-function, hand-held, IR remote transmitter permits remote
operation of Input Selection, Volume Up/Down, Balance L/R and
Mute functions
B The Synergy Power Supply simultaneously receives transmitted data
and displays a numerical Volume control position from 0 to 63.5 dB in
increments of 0.5 dB.
The remote transmitter handset operates on a standard 9 volt battery
available from a wide variety of sources. This battery is accessed by
removing the two Phillips-head screws on the back side of the handset.
Four (4) different data rate transmission codes can be selected if inter-
ference from other IR remote transmitters become an issue. Please
contact your Jeff Rowland Design Group dealer or distributor for
information on selecting different data codes.
A
B
To Next Page
Loading...
