Jegs 81426 User Manual

Installation Instructions for 81426
Hydraulic Lift Cart
500 lb. Capacity
Specifications
Capacity
500 lb.
Lift Range
9-1/4” to 28-1/2”
Table Size
27-3/4” x 17-3/4”
Important Safety Information
Assembly Precautions
1. Wear ANSI-approved safety goggles and heavy-duty gloves during assembly and use.
2. Keep assembly area clean and well lit.
3. Assemble only according to these instructions. Improper assembly can create hazards.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of drugs or medication.
Use Precautions
1. Do not exceed 500 lb. max weight capacity. Be aware of dynamic loading! Sudden load movement may briefly create
excess load causing product failure.
2. Use only on flat, level and hard surface capable of supporting the Lift Table and any item(s) placed on table. Evenly
distribute load on table to avoid tipping.
3. Use as intended only. Do not use Lift Table to lift or transport people.
4. Follow all hydraulic bleeding instructions specified in this manual.
5. This product is not a toy. Do not allow children to play with or near this item.
6. Use as intended only.
7. Do not adjust Safety Valve.
8. Keep clear of load while lifting and lowering.
9. Lower load slowly.
10. Do not use for aircraft purposes.
11. Inspect before every use; do not use if parts are loose or damaged.
12. Maintain product labels and nameplates. These carry important safety information.
Assembly Instructions
Read the entire IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text subheadings therein
before setup or use of this product.
1. With assistance, grip the Base (9) of the Hydraulic Lift Table and
lift it from the box. Do not just grip the Table. Doing so will leave the
unit's frame in the packaging. Wheels (12)
2. Alternative: set the packaging sideways, grip the Base, and slide Lock Nuts (11)
the Lift Table out of the box
Washers (29)
3. Turn the Lift Table on its side.
Bushings (13)
Bolts (14)
Figure A
1-800-345-4545 jegs.com

Jegs 81426 Specifications

General

Brand	Jegs
Model	81426
Category	Outdoor Cart
Language	English

Summary

Specifications

Capacity Specification

Details the maximum weight the lift cart can safely handle.

Lift Range Specification

Outlines the minimum and maximum operational height.

Table Size Specification

Provides the dimensions of the lift table surface.

Important Safety Information

Assembly Precautions

Safety guidelines to follow during the assembly process.

Use Precautions

Critical safety measures for operating the lift table.

Assembly Instructions

Initial Unpacking and Preparation

Instructions for safely removing the lift table from packaging.

Wheel and Pump Lever Installation

Steps for attaching the front wheels and pump lever assembly.

Handle Attachment and Functional Test

Procedures for securing the handle and testing lift table operation.

Operating Instructions

Locking Casters and Raising Lift

Steps to secure the table and lift it using the pump lever.

Engaging Safety Bars and Lowering Lift

How to use safety bars and control lowering the lift.

Maintenance

Cleaning, Maintenance, and Lubrication

Guidelines for cleaning, inspection, and lubrication of the lift table.

Bleeding Instructions

Purging Air from Hydraulic System

Steps to remove air from the hydraulic system for proper performance.

Parts Lists and Diagrams

Main Parts List

A detailed list of all major components of the lift cart.

Main Assembly Diagram

Visual representation showing the assembly of the main components.

Parts List A - Ram

Detailed listing of parts specific to the hydraulic ram assembly.

Assembly Diagram A - Ram

Exploded view illustrating the assembly of the hydraulic ram.