JENCO 9031M - Display & Keys Functions; Display

4
DISPLAY & KEYS F UNCTIONS
A. Display
Figure 3: Active LCD screen
1.
-
Low battery indicator.
2. MAIN DISPLAY-
Main display for dissolved
oxygen values.
3. mBar-
Display pressure units in
calibration mode.
4. Data storage site number.
5. CAL-
Calibration mode indic ator.
6. K1, K2, K3, K4, K5, KC:
Sensor cap coefficient
indicators when entering
new sensor cap coefficient.
7. Temperature unit. 8. Temperature values
9. mg/L,%-
dissolved oxygen unit.
10. Full, Recall, Each, All,
Delete: Instrument’s data
storage indicators.
11.SAL ppt-
Display salinity units in
calibration mode.
12. CAP-
Sensor cap parameter
setting mode
13.Continuous or Manual-
Continuous or Manual
sampling mode indic ator.
14. SAVE-
To save a reading into the
data storage.