Jenn-Air JES9860ACS User Manual

JES8750AAB/W
JES8850AAB/Q/S/W
JES8850ACB/S/W
JES9750AAB/S/W
JES9750ACB/W
JES9800AAB/Q/S/W
JES9800ACB/S/W
JES9860AAB/S/W
JES9860ACB/S/W
16025927
February 2005
©2005 Maytag Services
Electric
Slide-In
Range
This Base Manual covers general information
Refer to individual Technical Sheet
for information on specific models
This manual includes, but is
not limited to the following:
Service
This manual is to be used by qualified appliance
technicians only. Maytag does not assume any
responsibility for property damage or personal
injury for improper service procedures done by
an unqualified person.

Jenn-Air JES9860ACS Specifications

General

Brand	Jenn-Air
Model	JES9860ACS
Category	Ranges
Language	English

Summary

Service Manual Overview and Model Identification

Brand and Manual Identification

Identifies the Jenn-Air brand and the scope of the service manual.

Applicable Model Numbers

Lists the specific electric slide-in range models covered by this manual.

Important Safety and Servicer Information

Servicer and Consumer Safety Notices

Provides critical warnings regarding electrical shock and proper servicing procedures.

Customer Support Contact Information

Provides contact details for customer service and technical assistance.

Understanding Safety Symbols

Explains the meaning of DANGER, WARNING, and CAUTION safety labels.

General Appliance Safety Guidelines

General Safety Precautions for All Appliances

Covers installation, usage, child safety, apparel, servicing, storage, and fire safety.

Surface Cooking Unit Safety

Details safe practices for using surface elements, cookware, and handling spills.

Oven and Surface Safety Precautions

Oven Operating and Safety Precautions

Focuses on safe door opening, handling food containers, vent obstruction, and rack placement.

Self-Cleaning Oven Safety

Advises against cleaning door gasket, using oven cleaners, and specifies cleaning procedures.

Glass/Ceramic Cooktop Safety

Warns against cooking on broken surfaces and advises caution when cleaning hot areas.

Ventilation Hood Safety

Highlights the importance of frequent cleaning and turning off the fan when flaming foods.

Emergency Fire Procedures

Provides instructions for surface element fires and oven fires, including when to call the fire department.

General Cooking Precautions

Offers advice on food cooking, cleaning products, plastic items, cookware, and range top usage.

Product Safety Device Information

Safety Device Integrity

Emphasizes that safety devices must not be removed, bypassed, or altered.

Grounding System Explanation

Details the function of the grounding prong and the importance of reconnecting ground wires.

General Appliance Information

Technical Specification Reference

Directs users to individual Technical Sheets for detailed product specifications.

Understanding Model Nomenclature

Explains the coding system used for model identification, including brand, fuel, color, and listing.

Appliance Placement and Identification

Oven Placement Guidelines

Provides guidance on kitchen placement and the importance of airflow around the range.

Air Vent Obstruction Warning

Warns against blocking air vents to prevent overheating and automatic power removal.

Locating Model and Serial Numbers

Instructs on finding the model and serial numbers for service and parts requests.

Proper Grounding Procedures

Explains the importance of grounding and how to ensure it for safety.

Product Registration and Identification

Details how to register the appliance and record model identification information.

Locating Authorized Service

Provides instructions and contact information for locating authorized service personnel.

Ordering Parts and Accessories

Gives contact information for purchasing replacement parts and accessories.

Extended Service Plan Information

Offers information on purchasing an extended service protection plan for the appliance.

Electric Slide-In Range Description

Overview of Range Components

Labels and identifies key external components of the electric slide-in range.

Troubleshooting Common Issues

Troubleshooting Chart: Problem Resolution

Lists common problems, their possible causes, and suggested correction steps.

Oven Light Troubleshooting

Addresses issues with the oven light not operating, including checking connections and the bulb.

Oven Door Lock Troubleshooting

Details troubleshooting steps for an oven door that fails to unlock, especially after self-cleaning.

Oven Smoke and Odor Issues

Explains normal initial smoking or odor and how to manage it.

Surface Element Heating Issues

Covers troubleshooting for surface elements that are not heating correctly.

Advanced Troubleshooting and Fault Codes

Self-Clean Cycle Troubleshooting

Provides steps for troubleshooting a self-clean cycle that is not functioning properly.

Surface Element Cycling Issues

Addresses frequent cycling of surface elements or warming zones, explaining normal operation.

Understanding Fault Codes

Lists various fault codes (F0-0 to F9-3), their descriptions, and components to troubleshoot.

Oven Sensor and Meat Probe Testing

Oven Sensor and Meat Probe Resistance Charts

Provides resistance values for oven sensors and meat probes at various temperatures.

Component Testing Procedures

Oven Light Housing Testing

Details testing the oven light housing for continuity and bulb functionality.

Step-Down Transformer Testing

Explains how to test the step-down transformer for correct voltage output.

Door Plunger Switch Testing

Describes testing the door plunger switch for continuity when the plunger is in or out.

Autolatch Assembly Testing

Guides on testing the autolatch assembly and refers to the parts manual for specific switches.

Halogen Element Testing

Provides procedures for testing halogen elements for resistance and voltage.

Coil Element Testing

Details testing coil elements for resistance and voltage.

Ribbon Element Testing

Explains how to test ribbon elements for resistance and voltage.

Component Testing Procedures (Continued)

Temperature Sensor Testing

Outlines how to measure the resistance of the temperature sensor.

Infinite Switch Testing

Describes testing infinite switches for resistance and time-on percentages.

Dual Element Infinite Switch Testing

Details testing dual element infinite switches for resistance and time-on percentages.

Bake Element Testing

Provides procedures for testing bake elements for resistance and voltage.

Broil Element Testing

Explains how to test broil elements for resistance and voltage.

Grill Assembly Testing

Guides on testing the grill assembly for resistance and voltage.

Hi-Limit Temperature Switch Testing

Details testing the hi-limit temperature switch for normally closed operation.

Convection Motor Testing

Describes testing the convection motor for voltage and winding resistance.

Cooling Fan Motor Testing

Explains how to test the cooling fan motor for voltage and winding resistance.

Downdraft Motor Testing

Guides on testing the downdraft motor for voltage and winding resistance.

Electronic Control Panel Testing

Details voltage measurements within the electronic control panel for various functions.

Electronic Oven Control (EOC) Testing

Oven Temperature Adjustment Testing

Explains how to test and adjust oven temperature settings.

Timer Reminder Beep Setting

Describes how to set the number of beeps for timer completion.

Control Lock Function Testing

Details testing the control lock function for enabling/disabling oven and timer operations.

Sabbath Mode Function Testing

Explains testing the 12-hour shutoff feature that allows indefinite oven operation.

Sound Level Setting

Guides on selecting the beep volume level from lowest to highest.

24-Hour Clock Setting

Describes how to set the clock for a 12-hour or 24-hour time format.

Display Scroll Speed Adjustment

Explains how to set the speed of displayed messages (slow, medium, fast).

End-of-Cook-Time Signal Setting

Guides on setting the number of beeps for the end of a cook cycle.

Temperature Display Format

Describes how to select the temperature display in Fahrenheit (°F) or Celsius (°C).

Language Display Selection

Explains how to select the display language (English, French, or Spanish).

Factory Default Reset

Guides on resetting the clock and control to factory default settings.

Clock Display On/Off Control

Describes how to turn the clock display on or off.

Test Mode Access

Explains how to access functions for testing purposes through the control panel.

Control Panel Testing

Control Panel Circuitry Resistance Test

Details testing the control panel assembly for closed and open circuitry resistance.

Relay Logic and Cooking Modes

Understanding Relay Logic

Explains the relay logic for various cooking modes, indicating ON, OFF, or CYCLING states.

Electronic Oven Control Quick Test Mode

Performing EOC II Quick Test Mode

Provides step-by-step instructions for entering and performing the EOC II quick test mode.

Quick Test Mode Display Responses

Details the expected display indications for each pad press during the quick test mode.

Fault Code Description and Troubleshooting

Interpreting Oven Fault Codes

Explains the structure of fault codes (F#) and lists their descriptions and components to troubleshoot.

Disassembly Procedures: Range Removal and Control Panel

Removing and Replacing the Range Unit

Steps for safely pulling the range out and disconnecting power and ducting.

Disassembling Cooktop Cartridges

Instructions for removing and reinstalling cooktop cartridges.

Disassembling the Maintop Assembly

Detailed steps for removing the maintop, including disconnecting elements and wiring.

Disassembling the Control Panel

Guides on removing the control panel and transferring components to a new panel.

Disassembling the Electronic Control

Steps for removing the electronic control bracket and disconnecting wiring.

Disassembling the Infinite Switch

Instructions for removing infinite switches, including knob and front screw removal.

Disassembly Procedures: Access Panels and Elements

Disassembling the Bottom Access Panel

Steps to grasp and pull down the bottom access panel for removal.

Disassembling Indicator Lights

Guides on removing indicator lights from the control panel.

Disassembling the Transformer

Instructions for removing the transformer, including disconnecting wiring and screws.

Disassembling the Bake Element

Steps for removing the bake element, including disconnection and terminal access.

Disassembling the Broil Element

Guides on removing the broil element, including disconnection and terminal access.

Disassembling the Meat Probe Receptacle

Instructions for removing the meat probe receptacle, including main top removal.

Disassembling the Back Panel

Steps for removing the back panel, including upper and outside edge screws.

Disassembling the Cooling Fan

Guides on removing the cooling fan, including disconnecting wiring and screws.

Disassembling the Downdraft Blower Motor

Instructions for removing the downdraft blower motor, including ducting and electrical connections.

Disassembly Procedures: Oven Components

Disassembling the Oven Sensor

Steps for removing the oven sensor, including disconnecting terminals and pulling wiring.

Disassembling the Front Side Trim

Instructions for removing the front side trim pieces, including grasping and rolling off clips.

Disassembling Oven Light Bulb and Socket

Guides on removing the oven light bulb and socket assembly, including insulation displacement.

Disassembling the Oven Light Switch

Steps for removing the oven light switch from the front of the oven chassis.

Disassembling the Convection Fan

Instructions for removing the convection fan motor, including cover and electrical connections.

Disassembling the Oven Vent/Smoke Eliminator

Guides on removing the smoke eliminator by turning counterclockwise and pulling down.

Disassembling the Hi-Limit Thermostat

Steps for removing the hi-limit thermostat, involving maintop assembly removal.

Disassembly Procedures: Oven Door and Latch

Disassembling the Oven Door Hinge

Instructions for removing the oven door hinge receiver, including door and trim removal.

Disassembling the Oven Door Latch

Guides on removing the oven door latch, including control panel and light switch removal.

Removing the Oven Door

Provides steps for safely lifting and removing the oven door from its hinge receivers.

Disassembling the Oven Door

Detailed steps for disassembling the oven door, including glass, trim, and handle removal.

Oven Door Inner Disassembly

Inner Oven Door Disassembly Steps

Detailed steps for disassembling the inner oven door glass, baffle, and insulation.

Appendix A: Installation Instructions

Installation Instructions: Cabinet Clearances

Cabinet Clearance Requirements

Details required clearances between the range and combustible cabinets for safe installation.

Installation Instructions: Cabinet Dimensions

Cabinet Dimension and Material Notes for Specific Models

Provides notes on cabinet dimensions, vinyl material caution, and countertop cut-out requirements for specific models.

Installation Instructions: Anti-Tip Device

Mobile Home Installation Requirements

Specifies installation standards for ranges in mobile homes, referencing relevant codes.

Anti-Tip Device Installation Procedure

Details the critical steps for installing the anti-tip bracket to prevent tip-over accidents.

Range Placement and Location

Provides guidance on selecting a suitable location for the range, avoiding drafts and obstructions.

Anti-Tip Bracket Installation and Range Setup

Anti-Tip Bracket Installation Options

Details installation options for anti-tip brackets in wood or cement construction.

Final Range Installation and Leveling

Covers aligning the range, checking for levelness, and verifying anti-tip bracket engagement.

Connecting the Range to Electrical Supply

Electrical Supply Requirements (US)

Specifies adherence to Local and National Electric Codes for power supply.

Electrical Supply Requirements (Canada)

Specifies adherence to Canadian Electric Codes for power supply.

Assessing House Wiring Adequacy

Advises consulting the local utility company about the adequacy of the home's electrical service.

House Wiring Standards and Circuit Requirements

Details house wiring requirements, including circuit type, wiring codes, and conduit usage.

Range Electrical Connections

Explains how to connect the range to the power supply, including cord types and terminal blocks.

Range Electrical Connections (Canada)

Details electrical connection requirements for models shipped to Canada.

Electrical Wiring Configurations

3-Wire Service Cord/Conduit Installation

Provides instructions for connecting a 3-wire service cord or conduit to the terminal block.

4-Wire Service Cord/Conduit Installation

Details connecting a 4-wire service cord or conduit, including ground strap modification.

Converting from 3-Wire to 4-Wire Service

Outlines the procedure for converting a 3-wire service cord to a 4-wire service cord.

Cabinet Clearances for JES9750A/9800A/9860A Models

Cabinet Clearance Requirements for Specific Models

Details required clearances between the range and combustible cabinets for safe installation.

Cabinet Dimensions and Material Considerations

Cabinet Dimension and Material Notes for Specific Models

Provides notes on cabinet dimensions, vinyl material caution, and countertop cut-out requirements for specific models.

Anti-Tip Device Installation for Specific Models

Mobile Home Installation Standards

Specifies installation standards for ranges in mobile homes, referencing relevant codes for specific models.

Anti-Tip Device Installation for Specific Models

Details critical steps for installing the anti-tip bracket for specific models.

Range Placement and Location for Specific Models

Provides guidance on selecting a suitable location for the range for specific models.

Anti-Tip Bracket Installation and Range Setup

Anti-Tip Bracket Installation Options

Details installation options for anti-tip brackets in wood or cement construction.

Final Range Installation and Leveling Procedures

Covers aligning the range, checking for levelness, and verifying anti-tip bracket engagement.

Electrical Connection for Specific Models

Electrical Supply Requirements (US) for Specific Models

Specifies adherence to codes for power supply for specific models.

Electrical Supply Requirements (Canada) for Specific Models

Specifies adherence to Canadian codes for power supply for specific models.

House Wiring Adequacy Assessment

Advises consulting the local utility company about the adequacy of the home's electrical service.

House Wiring Standards for Specific Models

Details house wiring requirements for specific models.

Range Electrical Connections for Specific Models

Explains how to connect the range to the power supply for specific models.

Range Electrical Connections (Canada) for Specific Models

Details electrical connection requirements for models shipped to Canada.

Electrical Wiring Configurations for Specific Models

3-Wire Service Cord/Conduit Installation for Specific Models

Provides instructions for connecting a 3-wire service cord or conduit for specific models.

4-Wire Service Cord/Conduit Installation for Specific Models

Details connecting a 4-wire service cord or conduit for specific models.

Converting from 3-Wire to 4-Wire Service for Specific Models

Outlines the procedure for converting service cords for specific models.

Downdraft Installation Procedures

Downdraft Venting Location and Requirements

Determines electrical outlet location and plans downdraft blower venting path (rear, floor, side).

Downdraft Blower Assembly and Venting

Cabinet Cutouts for Downdraft Venting

Details making cabinet cutouts for right or left side venting of the downdraft blower.

Adjusting Blower Housing Mounting Brackets

Instructs on relocating mounting brackets on the blower housing for different venting configurations.

Attaching Blower Housing and Flex Duct

Guides on attaching the blower housing to the floor and connecting the flex duct.

Downdraft Blower and Range Installation

Blower Installation Pre-requisites

Notes to install the blower before the range and refer to the duct plan.

Installing the Range Unit

Covers aligning the range and ensuring the anti-tip bracket is secured.

Connecting Downdraft Blower Electrically

Instructs on connecting the blower power cord to the blower motor housing.

Installing Flex Duct to Blower Inlet

Guides on securing the flex duct to the blower inlet using a duct clamp.

Checking Downdraft System Operation

Steps to install the air filter and grille, remove packing, and check system operation.

Appendix B: Use Information

Oven Cooking: Control Pad Operation

Oven Cooking Overview and Control Panel

Introduces oven cooking functions and describes the control panel layout and display.

Oven Cooking Safety Cautions

Provides important safety warnings regarding packing material, prepared food, and oven usage.

Control Pad Operation Basics

Explains how to operate control pads, including beeps for input and errors.

Customizing Control Options

Mentions that factory-set options can be changed and refers to page 12 for details.

Setting Control Functions

General guidance on setting control functions.

Setting the Oven Clock

Instructions for setting the current time, including power interruption recovery.

Using Oven Timers

Explains how to set and use the oven timers, noting they do not control the oven.

Oven Cooking: Baking and Roasting

Bake and Roast Function Operation

Details how to use the Bake pad for baking and roasting, including preheat and temperature settings.

Baking Operation Notes

Provides tips on recalling temperatures, changing temperatures, and preheat times.

Convect Bake and Roast Operation

Explains how Convect Bake and Convect Roast functions work and provides usage guidelines.

Convect Bake/Roast Pad Operation

Details how to use the Convect Bake and Convect Roast pads for cooking.

Oven Cooking: Broiling and Timed Cooking

Broil Function Operation

Instructions for using the Broil pad for top browning, including preheat and food placement.

Clock-Controlled Oven Cooking

Explains how to program the oven to start and stop automatically using Cook Time/Stop Time pads.

Broiling Operation Notes

Provides tips on hi/lo broil, cooling fan operation, and broiler pan usage.

Quick Preheat Function Operation

Describes how to use the Quick Preheat pad to decrease cooking time.

Oven Cooking: Keep Warm, Meat Probe, Bread Proofing

Keep Warm Function Operation

Instructions for using the Keep Warm pad to keep foods warm or warm breads and plates.

Meat Probe Function Operation

Details how to use the meat probe for roasting and baking to desired internal temperatures.

Bread Proofing Function Operation

Explains how to use the Bread Proofing pad for dough preparation.

Quick Preheat Usage Notes

Provides notes for optimal results when using the Quick Preheat option.

Keep Warm Function Notes

Offers notes on optimal food quality, duration, and keeping foods from drying.

Meat Probe Function Notes

Provides important notes on probe removal, retained heat, and cleaning procedures.

Bread Proofing Function Notes

Offers guidance on standard vs. quick proofing for dough requiring one or two rises.

Oven Cooking: Drying Function Details

Oven Cooking Functions Overview

Introduces oven cooking functions and describes the control panel layout and display.

General Oven Cooking Safety Cautions

Reiterates safety warnings for oven use, including packing material and prepared foods.

Control Pad Operation Details

Details pad operation, including input feedback and programming errors.

Control Options Configuration

Mentions changing control options and refers to page 15 for details.

Setting Control Functions

General guidance on setting control functions.

Clock Setting and Functionality

Instructions for setting the oven clock, including behavior after power interruption.

Timer Pad Functionality

Explains how to set and use the timers, noting they do not control the oven operation.

Oven Cooking: Baking and Convection Usage

Bake Pad Operation Guide

Detailed instructions for using the Bake pad, including preheating and temperature settings.

Baking Tips and Temperature Guidelines

Provides tips for recalling set temperatures, changing temperatures, and minimum cooking temperatures.

Convection Baking and Roasting Tips

Offers general rules for convection baking, including temperature adjustments and roasting time reductions.

Convect Bake/Roast Pad Usage Guide

Instructions for using the Convect Bake and Convect Roast pads for cooking.

Oven Cooking: Broiling and Timed Cooking

Broil Pad Operation Details

Instructions for using the Broil pad, including preheating and leaving the door open.

Clock-Controlled Oven Cooking Procedures

Explains how to program the oven to start and stop automatically.

Broiling Procedure Notes

Provides notes for broiling, including cooling fan operation and broiler pan usage.

Quick Preheat Pad Usage

Details how to use the Quick Preheat pad to reduce preheating time.

Oven Cooking: Keep Warm, Meat Probe, Bread Proofing

Keep Warm Function Operation

Instructions for using the Keep Warm pad to keep foods warm or warm breads and plates.

Meat Probe Function Operation

Details how to use the meat probe for roasting and baking to desired internal temperatures.

Bread Proofing Function Operation

Explains how to use the Bread Proofing pad for dough preparation.

Quick Preheat Function Notes

Provides notes for optimal results when using the Quick Preheat option.

Keep Warm Function Notes

Offers notes on optimal food quality, duration, and keeping foods from drying.

Meat Probe Function Notes

Provides important notes on probe removal, retained heat, and cleaning procedures.

Bread Proofing Function Notes

Offers guidance on standard vs. quick proofing for dough requiring one or two rises.

Oven Cooking: Drying Function Details

Drying Pad Operation Guide

Instructions for using the Drying pad for dehydrating fruits, vegetables, and herbs.

Drying Function Notes and Tips

Provides notes on purchasing drying racks, optimal temperatures, drying times, and food preparation.

Oven Cooking: Control Pad and Timer Functions

Oven Cooking Functions Overview

Recaps oven cooking functions and control panel layout for JES9800A** model.

Oven Cooking Safety Cautions (JES9800A**)

Reiterates safety warnings for oven use for the JES9800A** model.

Control Pad Operation for JES9800A**

Explains control pad operation for the JES9800A** model.

Control Options for JES9800A**

Mentions changing control options and refers to page 15 for details for the JES9800A** model.

Setting Control Functions for JES9800A**

General guidance on setting control functions for the JES9800A** model.

Clock Setting for JES9800A**

Instructions for setting the oven clock for the JES9800A** model.

Timer Pad Usage for JES9800A**

Explains how to set and use the timers for the JES9800A** model.

Oven Cooking: Baking and Convection Usage (JES9800A**)

Bake Pad Operation for JES9800A**

Detailed instructions for using the Bake pad for the JES9800A** model.

Baking Tips for JES9800A**

Provides tips for baking and minimum cooking temperatures for the JES9800A** model.

Convection Baking and Roasting Tips (JES9800A**)

Offers general rules for convection baking and roasting for the JES9800A** model.

Convect Bake/Roast Pad Usage for JES9800A**

Instructions for using the Convect Bake and Convect Roast pads for the JES9800A** model.

Oven Cooking: Broiling and Timed Cooking (JES9800A**)

Broil Pad Operation for JES9800A**

Instructions for using the Broil pad for the JES9800A** model.

Clock-Controlled Cooking for JES9800A**

Explains programming the oven to start and stop automatically for the JES9800A** model.

Broiling Notes for JES9800A**

Provides notes for broiling, including cooling fan operation for the JES9800A** model.

Quick Preheat Pad Usage for JES9800A**

Details using the Quick Preheat pad to reduce preheating time for the JES9800A** model.

Appliance Care and Cleaning Procedures

General Cleaning Precautions

Provides general cautions for cleaning, including ensuring the appliance is off and cool.

Cleaning the Access Panel

Instructions for opening, closing, and cleaning the access panel.

Cleaning the Broiler Pan and Insert

Details how to clean the broiler pan and insert, including soaking and dishwasher use.

Cleaning the Clock and Control Pad Area

Guides on cleaning the control pad area, including using a damp cloth and glass cleaner.

Cleaning the Control Panel Surface

Instructions for cleaning the control panel surface, including stubborn soil removal.

Cleaning the Control Knobs

Details how to remove, wash, and replace control knobs, avoiding abrasive cleaners.

Cleaning the Porcelain Enamel Cooktop

Provides instructions for cleaning the porcelain enamel cooktop, warning against misuse and acidic spills.

Cleaning Plastic Door Handles

Guides on cleaning plastic door handles, advising against abrasive or caustic cleaners.

Cleaning the Oven Window and Door Glass

Instructions for cleaning oven glass, warning against excessive water and abrasive materials.

Oven Interior Cleaning

Refers to page 17 for instructions on setting a self-clean cycle.

Cleaning the Oven Racks

Details how to clean oven racks and mentions using oil to restore movement.

Care and Cleaning: Surfaces and Components

Cleaning Stainless Steel Surfaces

Provides detailed instructions for cleaning stainless steel, including soil levels and recommended products.

Cleaning the Painted Enamel Storage Drawer

Guides on cleaning the storage drawer, warning against warm surfaces and abrasive agents.

Cleaning Grill Accessories

Instructions for cleaning grill accessories, including basin pan, element, and grates.

Cleaning Porcelain Basin and Pan

Details cleaning the basin pan and basin, including methods for light and moderate soil.

Cleaning Cooktop Elements

Provides instructions for cleaning cooktop elements, warning against immersion and abrasive materials.

Cleaning Non-Stick Coated Cast Aluminum Grates

Guides on cleaning non-stick coated grates, including washing methods and seasoning.

Cleaning the Grease Cup

Instructions for locating, emptying, and cleaning the grease cup.