To Next PageTo Next Page
Need help?Do you have a question about the Jenn-Air JGRP536WP00 and is the answer not in the manual?
General| Number of Burners | 5 |
|---|---|
| Convection Oven | Yes |
| Self-Cleaning | Yes |
| Color | White |
| Width | 36 in |
| Height | 36 in |
| Fuel Type | Gas |
Explains safety alert symbols, DANGER and WARNING terms for hazard identification.
Provides critical steps to take immediately if you smell gas.
Lists required tools, parts, and information on high altitude conversion kits.
Details dimensions for 30/36 models and mobile home installation requirements.
Specifies cabinet dimensions and minimum clearance requirements for 48" models.
Warns about electrical shock hazards and details power/grounding specs.
Warns about explosion hazards and covers gas type requirements.
Details gas line connection methods and the manual shutoff valve requirement.
Covers regulator pressure requirements, altitude adjustments, and testing.
Guides on unpacking the range and installing the anti-tip bracket for safety.
Highlights explosion hazards and details flexible gas line assembly.
Steps for completing gas/electrical hookups, leveling, and installing the griddle.
Covers burner installation, flame height, and operational checks.
Completing installation, checking parts, and guidance on obtaining service.
Detailed steps for converting the range to LP gas, including regulator adjustment.
Instructions for converting the oven bake burner for natural gas, including orifice changes.
Steps for replacing the bake burner electrode and gas orifice spud.
Steps for converting the oven broil burner for natural gas.
Steps for replacing the broil burner orifice and electrode.
Steps for handling electrodes and gas orifice spuds for the left oven cavity.
Guide to replacing surface burner orifices with correct sizes for natural gas.
Steps for completing installation and verifying proper cooktop burner flame.
Covers natural gas regulator adjustment and supply pressure testing.
Instructions for removing oven bake burner components for natural gas conversion.
Steps for replacing the electrode and gas orifice spud for natural gas.
Procedure for changing the broil burner orifice for natural gas.
Steps for converting the oven bake burner orifice in the left oven cavity.
Steps for handling electrodes and gas orifice spuds for the left oven.
Guide to replacing surface burner orifices with correct sizes for natural gas.
Introduction to the wiring diagrams and their purpose in servicing.
Explanation of symbols used in the oven wiring schematic.
Wiring diagram for the 4-burner cooktop configuration.
