2
What is AL2200AC?
AL2200AC is a wireless dual-band repeater, which you can use to expand the coverage of your
wireless network in just a few steps. It can also be an Access Point or Access Point Client.
The setup of AL2200AC can be done from your computer,
smart phone or pad (wirelessly or by cable)
On the AL2200AC you will find a switch where you
can select which mode you want to use the AL2200AC in.
Please see page 3 for a description of the different modes.
What is dual-band?
Wireless networks have until recently mainly used the 2.4GHz frequency to transmit / receive data.
Today wireless networking are widely used, which means that there are often many networks within
the same area. The 2.4GHz frequency is divided into 13 channels that overlap each other, which often
resulting in interference if there are several networks using the same frequency/channels.
There are also a lot of other electronics that also uses 2.4Ghz, so that the source for interference
are numerous.
A dual-band router transmits at the 5GHz frequency in addition to 2.4GHz, hence the name dual-band.
2 1 Internet34
5VDC
ON / OFF
Reset/WPS
WiFi
AirLink00868
Reset/WPS
ON/OFF
WIFI
5VDC
34 12 Internet
AirLink5GHz00868 AirLink00868
Jensen dual-band routers:
Air:Link 3000DG
Air:Link 5000AC
Air:Link 7000AC
Jensen with only 2.4GHz
Air:Link 1000G
Air:Link 59300
Air:Link 29150
Air:Link 3G
2.4GHz 2.4GHz5GHz
To Next Page
