Installation of driver in Linux
1. Download the latest Linux driver from www.jensenscandinavia.com/downloads
2. Copy the driver to your local folder.
3. Open console
4. Unzip the driver
5. Enter (and click enter)make
sudo apt-get install build-essential6. Enter (and click enter)
7. If you have the Eagle 500 - enter (and click Enter)sudo modprobe 8812au
If you have the Eagle 100 - enter sudo modprobe 8821au (and click Enter)
The driver should now be installed and your is ready for use.Eagle 100/Lynx 500
Page 6
To Next Page
Loading...