Why is my Jensen LCD TV remote not working?
If your Jensen LCD TV remote is not functioning, try the following: * Remove any obstacles between the remote and the unit. * Use the remote closer to the unit. * Point the remote directly at the remote sensor on the unit. * Replace the remote battery with a new one.
Why is there no picture or sound on my Jensen LCD TV?
If your Jensen LCD TV shows no picture or sound, ensure the unit is plugged in and turned on. Also, verify that the TV mode is selected. Try tuning to a new channel to rule out station issues, and check that the antenna is properly connected.
What to do if my Jensen LCD TV has no power?
If your Jensen LCD TV has no power, check that the AC power adapter is properly connected and ensure that the unit is turned on.
What to do if my Jensen LCD TV has no sound?
If your Jensen LCD TV has no sound, first, increase the volume. Second, check whether the mute function has been activated using the remote control.
How to fix bad picture quality on Jensen LCD TV?
To fix bad picture quality (snow, multiple images, distortion, blurry) on your Jensen LCD TV: * Check the antenna's location and adjust if needed. * Ensure the antenna cable is firmly connected. * Confirm all input cables are securely connected. * Check for local interference and remove any unshielded electrical devices nearby. As a last resort, turn the TV off for 30 minutes and then try again.
Why is my Jensen LCD TV showing a black and white picture?
If your Jensen LCD TV is showing a black and white picture, check to make sure the program you are watching is broadcast in color and not black & white.
What causes colored patches on the screen of my Jensen LCD TV?
If you are seeing colored patches on the screen of your Jensen LCD TV, make sure the antenna or audio/video source device is working properly. Also, ensure that all cables are connected firmly.
Warnings about electric shock, fire, explosion, and proper usage.
Various jacks for connecting external devices and power.
Guide for connecting TV antenna, cable, or satellite sources.
Connect A/V devices like VCRs and camcorders using S-Video.
Connect devices with composite video output/input using RCA cables.
Connect HD sources with component video output to YUV input.
Connect computer via VGA and audio jacks for PC display.
Adjust picture and sound parameters like brightness, contrast, balance, and bass.
Configure system settings, parental controls, and understand program ratings.
Solutions for the unit not powering on or the remote not working.
General| Resolution | 1366 x 768 |
|---|---|
| Display Type | LED |
| Aspect Ratio | 16:9 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Tuner | ATSC/NTSC |
| Built-in Tuner | Yes |
| Screen Size | 19 inches |
| Inputs | HDMI, USB, VGA, Component, Composite |
To Next Page