11
OPERATIONMPR419Q
Bluetooth Operation
Before using a Bluetooth device, it must be paired
and connected. Ensure that Bluetooth is activated on
your device before beginning the pairing process.
The head unit broadcasts the pairing signal
constantly when no devices are connected. Complete
the pairing sequence from your Bluetooth device.
Refer to the owner’s manual for your device for more
details.
The device name is “Jenses Media Player”.
Note: The head unit can be in any mode of operation
when pairing is performed.
The head unit supports A2DP wireless streaming
audio from a Bluetooth mobile device directly to your
head unit.
The following functions can be used to control the
music:
• Press to skip to the next available audio track.
• Press to skip to the previous audio track.
• Press /
II
to toggle between play and pause during
playback.
Preparation
Pairing a New
Device
Streaming Audio
Troubleshooting
To Next Page
Loading...
