Why is there no sound coming from my Jensen MS2A?
If your Jensen Car Receiver has no sound, first, make sure the volume isn't set too low; adjust it to a level you can hear. If the volume is fine, check the wiring connections to ensure they are properly connected.
How to fix a Jensen MS2A Car Receiver that has no power?
If your Jensen Car Receiver isn't powering on, and the power supply is properly connected to the vessel’s accessory terminal, ensure the vessel’s accessory switch is turned on by switching the ignition key to “ACC”. Also, check the fuse and replace it if it's blown.
General| Brand | Jensen |
|---|---|
| Model | MS2A |
| Category | Car Receiver |
| Language | English |
Crucial guidelines for safe operation and installation.
Lists the key features of the Jensen MS2A marine audio system.
Details the components included in the hardware kit for installation.
Lists the items included in the package and manual.
Advises on safe volume levels and awareness while operating a boat.
Instructions on preventing water damage to the unit.
Guidance on protecting the device from sunlight, dust, and water.
Recommendations for avoiding heat damage from engine compartments or sunlight.
Specifies the required power supply (12-volt DC negative ground).
Preliminary steps before starting the installation process.
Key considerations for a successful and safe installation.
Detailed steps for mounting the unit in the dashboard.
Procedure for detaching the unit from the dashboard after installation.
Access and adjust audio settings like Bass, Treble, and Balance.
Configure system settings like Contrast, Volume, and other operational parameters.
Describes the low battery alarm and visual warning indicators.
How to access and use the pre-defined equalizer settings.
Explains the loudness feature for enhanced low-volume listening.
Instructions for connecting and using an auxiliary audio device.
How to automatically store stations and scan presets.
How to switch between AM and FM bands.
Step-by-step guide for manual radio tuning.
How to automatically seek the next strong radio station.
Instructions for storing and recalling radio stations.
Lists technical specifications for MP3 file compatibility.
Procedures for connecting and disconnecting USB devices.
Guides on playback controls like pause, track select, repeat, and random.
How to cycle through display information during playback.
Instructions for searching and selecting MP3/WMA files and folders.
Steps to connect and enter iPod playback mode.
How to manage iPod playback functions like track selection and repeat.
How to change the display information for iPod playback.
Guide to searching iPod content by various criteria like artist or song.
Overview of Bluetooth technology and its capabilities.
Explains how to navigate and use Bluetooth menu settings.
Step-by-step guide for pairing a Bluetooth device with the MS2A.
How calls affect BT audio playback.
How to stream audio from a Bluetooth device using A2DP.
Lists the functions controllable via the JENSEN jControl app.
Instructions for connecting and using the jControl app.
Discusses ignition system noise and suppression methods.
Explains radio reception interference in moving environments.
Technical details for the FM radio tuner.
Technical details for the AM/MW radio tuner.
Overall technical parameters of the audio system.
To Next Page