What to do if my Jensen JHD1635BT Car Receiver displays ERROR-03 on the LCD?
If your Jensen Car Receiver shows 'ERROR-03' on the LCD, it means there's an abnormal current to the USB device. Try changing the mode or unplugging and reconnecting the USB device.
What to do if my Jensen JHD1635BT Car Receiver displays ERROR-02 on the LCD?
If your Jensen Car Receiver shows 'ERROR-02' on the LCD, it means there are no songs on the device. Remove the device and add songs.
What to do if my Jensen Car Receiver displays ERROR-04 on the LCD?
If your Jensen Car Receiver shows 'ERROR-04' on the LCD, it means the iPod/iPhone is not verified. Unplug and reconnect your iPod/iPhone.
Why does my Jensen JHD1635BT Car Receiver have no power?
If your Jensen Car Receiver has no power, it could be due to the vehicle’s accessory switch not being on. If the power supply is properly connected to the vehicle’s accessory terminal, switch the ignition key to “ACC”. Also, check if the fuse is blown and replace it if necessary.
What does ERROR-01 mean on my Jensen JHD1635BT?
If your Jensen Car Receiver shows 'ERROR-01' on the LCD, it indicates a database or decoder error. Try changing to another mode.
Why is there no sound coming from my Jensen JHD1635BT Car Receiver?
If you're not getting any sound from your Jensen Car Receiver, first, ensure that the volume isn't too low by adjusting it to an audible level. Also, check the wiring connections to ensure they are properly connected.
What to do if the keys on my Jensen JHD1635BT don't work?
If the operation keys on your Jensen Car Receiver do not work, it could be due to the control panel not being properly installed. Try reinstalling the control panel. If that doesn't work, the built-in microcomputer might not be operating correctly due to noise; press the RESET button.
Why can't my Jensen JHD1635BT tune to radio stations?
If your Jensen Car Receiver cannot tune to a radio station or the auto-seek function does not work, make sure the antenna cable is firmly inserted. If signals are too weak, select a station manually.
General| Brand | Jensen |
|---|---|
| Model | JHD1635BT |
| Category | Car Receiver |
| Language | English |
Advises keeping volume low to remain aware of road and traffic conditions.
Warns against exposing the product to water or excessive moisture to prevent damage.
States the product is designed for a 12-volt DC negative ground battery system.
Covers disconnecting the battery, removing transport screws, and important installation considerations.
Details the process of installing the unit into a standard 1-DIN opening.
Explains how to remove the unit and reconnect the battery after installation.
Details how to turn the unit on and off using the rotary encoder.
Explains how to adjust the volume using the rotary encoder and its display.
Explains the NOAA Weather Radio/Weatheradio Canada system and tuning to WB frequencies.
Describes the automatic switching to weather band upon receiving a warning tone.
Details setting a lock code and locking/unlocking channels.
Lists common messages like "Check Antenna", "No signal" with causes and solutions.
Describes how to answer, transfer, end, and reject incoming/outgoing calls via Bluetooth.
Lists common symptoms, their causes, and solutions for operational issues.
Lists detailed technical data for USB, FM, AM, and general radio performance.
To Next Page
