To Next PageTo Next PageWhy Jensen Car Receiver has no power?
Your Jensen Car Receiver might not be getting power because the vessel’s accessory switch isn't on. If the power supply is properly connected, switch the ignition key to “ACC”. Another possible reason is a blown fuse, in which case you should replace it.
Why Jensen JHD3630BT Car Receiver has no sound?
If your Jensen Car Receiver isn't producing any sound, first, check the volume level and adjust it to a level you can hear. Also, the wiring might not be properly connected, so it's a good idea to check all wiring connections.
What to do if Jensen JHD3630BT Car Receiver sound skips?
If the sound skips on your Jensen Car Receiver, it could be due to a couple of reasons. First, check the installation angle; it should be less than 30 degrees. If it's more, adjust it. Also, the disc might be dirty or defective. Try cleaning the disc or using a new one.
What to do if Jensen Car Receiver operation keys do not work?
If the operation keys on your Jensen Car Receiver aren't working, it could be due to improper installation of the control panel, so try reinstalling it. Alternatively, noise might be interfering with the built-in microcomputer. In this case, press the RESET button.
General| Brand | Jensen |
|---|---|
| Model | JHD3630BT |
| Category | Car Receiver |
| Language | English |
Guidelines for cleaning and caring for discs to ensure proper playback.
Pre-installation steps including disconnecting the battery and reading important notes.
Instructions for mounting the unit in a standard 1-DIN dashboard opening.
Steps to safely remove the head unit from its mounting sleeve.
Visual guide illustrating all power, speaker, and antenna connections for the JHD3630BT unit.
How to turn the unit on/off and adjust the audio volume level.
Adjusting Bass, Treble, Balance, Fader, EQ, and Loudness.
Selecting audio sources (Tuner, USB, AUX, BT) and managing inputs.
Procedures for resetting the unit and understanding LCD display information.
Adjusting key beep, LCD brightness/contrast, tuning region, and clock format.
Configuring SiriusXM, Bluetooth, Weather Alerts, and battery settings.
Step-by-step guide to set the current time on the unit's display.
How to view extended information that does not fit on the LCD screen.
Storing and recalling radio stations using preset buttons.
Selecting stations via manual tuning, auto seek, and preset scan.
Displaying and searching for radio data service information.
Information on NOAA broadcasts and tuning to weatherband frequencies.
How the unit automatically switches to weather band during alerts.
Configuring SAME codes to filter weather alerts by geographic region and alert type.
Inserting discs/USB, playback control, and file format specifications.
Selecting tracks, folders, repeat/random play, and using playlist search.
Procedures for inserting CDs and USB devices for playback.
Switching to SiriusXM mode, accessing radio ID, and selecting bands.
Tuning channels, direct entry, storing presets, and category-based selection.
Changing display information between single and double line text.
Explains common on-screen messages and their corresponding causes and solutions.
Displays indicating the quality of the satellite signal reception.
Procedure for setting a lock code and locking/unlocking specific channels.
Connecting and accessing iPod mode, including power on/off.
Managing playback, repeat, random play, and selecting tracks.
Using playlist search and alternate display modes for iPod content.
Information about Bluetooth technology and its use with the unit.
Navigating Bluetooth settings and pairing mobile devices.
Playing music via Bluetooth A2DP and controlling track selection.
How to pause and resume audio playback from a Bluetooth device.
Answering, transferring, ending, and rejecting incoming/outgoing calls.
Recommendations for keeping the unit clean, dry, and protected from damage.
Understanding and mitigating noise from ignition systems and environmental factors.
Table of symptoms, causes, and solutions for common operational problems.
Technical details for CD, FM, and AM/MW radio performance.
Operating voltage, impedance, output power, and dimensions.
Notes on regulatory compliance and potential interference.
