JHD3630BT
15
BLUETOOTH OPERATION
The JHD3630BT includes built-in Bluetooth technology that allows you to connect this head
unit to Bluetooth devices for streaming audio playback.
About Bluetooth Technology
Bluetooth is a short-range wireless radio connectivity technology developed as a cable
replacement for various electronic devices. Bluetooth operates in 2.4 GHz frequency range
and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched
by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba
and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks is under license. Other trademarks and trade names are those of their respective
owners.
Bluetooth Menu Options
NOTE: Please note that some BT menu options are only available while the unit is in BT
Audio mode.
Press and hold the PTY/CAT/MENU button (2) to enter menu adjustment mode. Press the
SEEK/TUNE buttons (18, 19) repeatedly to view the Bluetooth Setup Menu options. Press
ENTER to choose the highlighted option.
• BT ON/OFF: Press the ENTER button (16) to select "BT ON" or "BT OFF". When “On”,
the LCD will display the BT icon (default “BT ON”).
• BT HFP Volume: Press the ENTER button repeatedly to adjust the ring volume from 0-40
(default 20/previous setting).
• BT Device List: Press the ENTER button to view a list of previously paired mobile phone
device models.Press the SEEK/TUNE buttons (18, 19) to view devices from the list. You
cannot delete a device that is actively connected. Press the ENTER button to select the
device. Press the SEEK+ or SEEK- button to choose Lock/Unlock, Disconnect or Delete
for this device.
• LOCK/UNLOCK: The JHD3630BT can store up to 5 devices for BT connection.The
devices are stored in FIFO (First In First Out) order.To prevent a device from being
bumped from the list when more than 5 devices are used, you must lock the
device.To Lock/Unlock a device, press the ENTER button to display/change the
Locked or Unlocked icon.
• DISCONNECT: To disconnect a paired device, press the ENTER button to
temporarily remove the BT link. The link can be re-established through your phone
menu by selecting the JHD3630BT for connection.
• DELETE: To delete a device from the list, press the ENTER button. NOTE: Device
must be disconnected to be deleted.
• BT Pair: Press the ENTER button to turn BT Pair “On” to put the unit pairing mode to
search for and be discovered by BT devices.
• BT Auto Answer: Press the ENTER button to turn the Auto Answer function “On” or “Off”.
Pairing a Bluetooth Device
Before you begin, consult the owner’s manual for the Bluetooth device you want to pair with the
JHD3630BT.
1. Make sure the device is on and ready to receive a signal from the JHD3630BT. With the
JHD3630BT in BT Audio mode, choose “BT Pair” from the JHD3630BT menu and press
the ENTER button (16) to begin pairing. The unit is now waiting to connect to a mobile
phone device. With the BT function of the mobile phone device turned on, search for a
Bluetooth device.
2. When the Bluetooth device has completed its search, the mobile phone will display the
Bluetooth device name (JHD3630BT).
3. Select JHD3630BT. The BT icon will apear on the radio LCD.
4. Enter the pairing password (0000), if requested.
After connecting successfully, you will be able to listen to music stored on your Bluetooth
enabled device through the radio.
BT Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is connected. To
access Bluetooth mode and play songs stored on your phone, press the MODE button (4).
While in BT mode, the BT Audio icon illuminates on the LCD.
Selecting Tracks
During playback, press the SEEK/TUNE buttons (18, 19) to play the previous or next track.
To Next Page
Loading...
Need help?
General
