Need help?Do you have a question about the Jensen JHD905 and is the answer not in the manual?
Power| power supply requirements | DC 12 Volts, Negative Ground |
|---|---|
| current drain | 1.5 Ampere (max) |
Audio| loading impedance | 4 -8 ohms per channel |
|---|---|
| tone controls bass | ±10 dB at 100 Hz |
| tone controls treble | ±10 dB at 10 kHz |
FM Tuner| tuning range | 87.5-108.0 |
|---|---|
| fm mono sensitivity | 1.5uV |
| stereo separation @ 1 kHz | >25dB |
AM Tuner| tuning range | 522-1710 |
|---|---|
| sensitivity | <30uV |
Weather Band| sensitivity | <1uV |
|---|
Amplifier| total system power | 15 Watts Maximum |
|---|---|
| signal to noise | >70dB |
Weight and Dimensions| chassis dimensions | 131.6 (W) x 47.5 (D) x 86 (H) |
|---|
Describes two options for mounting the bracket securely.
Details how to fasten the radio to the mounted bracket.
How to turn the unit on/off and access software version.
Silences audio output and its behavior when unit is off.
Toggles LCD display between function and clock modes.
Describes what the LCD panel displays.
How to connect and select portable audio devices.
Instructions for using the timer function.
How to adjust the audio volume using VOL+ and VOL-.
Steps to set the current time on the clock display.
How to adjust audio settings and access menu options.
How to access and switch between AM and FM bands.
Steps for tuning frequencies manually or continuously.
Automatically tunes to the next strong station.
How to access the weather band and tune channels.
Details the Weather Alert function and its settings.
Covers general electrical and physical specifications.
Details FM tuner tuning range and sensitivity.
Details AM tuner tuning range and sensitivity.
Details weather band sensitivity.
Specifies amplifier power and signal-to-noise ratio.
To Next Page
