To Next PageTo Next PageWhy is there no sound coming from my Jensen JHD1630?
If your Jensen Car Receiver isn't producing any sound, first, ensure that the volume isn't set too low or muted. If that's not the issue, examine the wiring connections to confirm they are properly connected.
How to fix a Jensen JHD1630 Car Receiver that has no power?
If your Jensen Car Receiver isn't getting power, verify that the vehicle’s accessory switch is turned on. If the power supply is properly connected to the vehicle’s accessory terminal, switch the ignition key to “ACC” or “Run”. Also, check the fuse and replace it if it's blown.
What to do if the operation keys on my Jensen JHD1630 Car Receiver do not work?
If your Jensen Car Receiver operation keys aren't working, it might be due to a microcomputer malfunction caused by noise. Try pressing the RESET button.
Why can't my Jensen JHD1630 Car Receiver tune to radio stations, and the auto-seek doesn't work?
If your Jensen Car Receiver cannot tune to a radio station or the auto-seek function isn't working, check if the antenna cable is properly connected. If it is, the signals might be too weak, in which case, try selecting a station manually.
What to do if my Jensen JHD1630 Car Receiver cannot receive SiriusXM signal?
If your Jensen Car Receiver cannot receive the SiriusXM signal, ensure that the antenna connector is firmly and securely plugged into the SiriusXM tuner. If the message persists, the antenna cable or antenna element may be damaged, and you might need to replace the antenna.
General| Tuner | AM/FM |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| Preamp Outputs | No |
| Weatherband | Yes |
| DVD Player | No |
| CD Player | Yes |
| Touchscreen | No |
| GPS Navigation | No |
| Backup Camera Input | No |
| Remote Control | Yes |
| Power Output | 45W x 4 |
Guidelines for maintaining awareness of road and traffic conditions while operating the vehicle.
Specifies the required DC voltage and grounding system for operation.
Critical warnings regarding fire, electric shock, and interference risks.
Steps to take before starting the installation, including disconnecting the battery.
Step-by-step guide for mounting the radio chassis into a DIN opening.
Diagram and pin assignment details for connecting the radio's wiring harness.
Instructions for turning the unit on/off and adjusting the volume level.
How to access and modify Bass, Treble, Balance, and Fader settings.
Using preset EQ curves and enabling the Loudness feature for enhanced audio.
Storing and recalling favorite radio stations using preset buttons.
Accessing and tuning into NOAA Weather Radio broadcasts.
How the unit automatically switches to weather band for alerts.
Configuring SAME codes to filter specific weather alerts.
Methods for tuning and directly accessing satellite radio channels.
Explanations and solutions for common SiriusXM on-screen messages.
A table of common problems, their causes, and recommended solutions.
