Jensen JHD905 User Manual

JHD905
5
Antenna Connector
(Black Wire)
9-Pin Connector
(Male)
3A Fuse
Left Speaker +
(White)
Left Speaker -
(White/Black)
Right Speaker +
(Gray)
Right Speaker -
(Gray/Black)
Ground (Black)
Accessory (Red)
NOTE: Do not connect the red wire
to a constant power connection. It
should be connected to a vehicle
connection with switched power,
such as IGN or ACC.
Wiring
The wiring diagram depicts all the wiring connections required for proper operation of the unit.

Jensen JHD905 Specifications

Power

power supply requirements	DC 12 Volts, Negative Ground
current drain	1.5 Ampere (max)

Audio

loading impedance	4 -8 ohms per channel
tone controls bass	±10 dB at 100 Hz
tone controls treble	±10 dB at 10 kHz

FM Tuner

tuning range	87.5-108.0
fm mono sensitivity	1.5uV
stereo separation @ 1 kHz	>25dB

AM Tuner

tuning range	522-1710
sensitivity	<30uV

Weather Band

sensitivity	<1uV

Amplifier

total system power	15 Watts Maximum
signal to noise	>70dB

Weight and Dimensions

chassis dimensions	131.6 (W) x 47.5 (D) x 86 (H)