JHD3630BT
16
Pausing Playback
During playback, press the MUTE/>|| button (24) to pause the BT AUDIO player. “BT AUDIO
PAUSE” will appear on the LCD. Press MUTE/>|| again to resume playback. If you change to
another mode, the mobile phone audio will pause. Press the MODE button (4) to return to BT
mode and resume mobile phone audio playback.
NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the
device is disconnected inadvertently, the unit will automatically search for the matching
BT mobile phone when the power is restored.
Incoming/Outgoing call
While the mobile device is connected through BT, the phone number for incoming calls will
appear on the LCD. The incoming ring will be output throught the unit unless the unit is
broadcasting a Weather Band Alert or the PA system is in use.
Answer Call
If the BT Auto Answer function is turned “Off”, the user must press the "CALL" button (3) to
receive and incoming call.
If the BT Auto Answer function is turned “On”, the unit will automatically receive the incoming
call after 5 seconds of ringtone.
Transfer Call
During the call, press and hold the "CALL" button transfer the call between the unit and the
mobile device.
End Call
Press the “CALL” button to end a call. The unit will return to the previous mode.
Reject Incoming Call
To reject an incoming call, press and hold the “CALL” button.
To Next Page
Loading...
Need help?
General
