Why does my Jensen MP1313 blow fuses?
Your Jensen Car Receiver might be blowing fuses due to several reasons: * The power wire could be shorting to the ground. Ensure the wire isn't pinched. * Speaker wires might be shorting to the ground. Make sure the speaker wire is not pinched. * An incorrect fuse or one that's too small could be installed. Install a fuse with the correct rating.
Why is there no power to my Jensen Car Receiver?
If there's no power to your Jensen Car Receiver, the inline fuse might be blown. Check and replace the fuse.
What to do if not all speakers operate in my Jensen MP1313 Car Receiver?
If not all speakers are working with your Jensen Car Receiver, it could be due to: * Incorrect splices or connections. Check all splices and connections. * Speaker wires shorting to the chassis ground or to each other. Check splices and insulate all bare wires.
How to fix CD skipping too much on Jensen MP1313?
If your Jensen Car Receiver's CD player skips too much, it might be because the receiver mount isn't solid or the backstrap isn't secure. Check the mounting and backstrap, and tighten if needed.
General| Tuner | AM/FM |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Display | LCD |
| Supported Formats | MP3, WMA |
| DIN Size | Single DIN |
| Number of Channels | 4 |
| Remote Control | Yes |
| Peak Output | 50 Watts x 4 Channels |
| Power Output | 50 Watts x 4 Channels |
To Next Page
