6
Horizontal Band Saw
5.0 SPECIFICATIONS
Model Number EHB-1018VM EHB-1018VMH
Stock Number 891070 891080
Capacity (in.):
Round at 90° 10 10
Round at 60° 6 6
Round at 45° 10 10
Rectangle at 90° 10x17 10x17
Rectangle at 60° 6x5 6x5
Rectangle at 45° 10x12 10x12
Square at 90° 10x10 10x10
Square at 60° 5-1/2x5-1/2 5-1/2x5-1/2
Square at 45° 10x10 10x10
Vise Swivel (°) 0 0
Head Movement (°) 60 R, 45 L 60 R, 45 L
Blade Size (in.) 1 x .035 x 144 1 x .035 x 144
Blade Wheel Diameter (in.) 14 14
Blade Wheel Speed (SFPM) Variable 50-275 Variable 50-275
Bed Height (in.) 32 32
Motor (HP) 2 HP, 230/460V 3 Phase
CSA/CUS Certifi ed
2 HP, 230/460V 3 Phase
CSA/CUS Certifi ed
Overall Dimensions (in.) 85 x 40 x 44 85 x 40 x 44
Net Weight - approx. (lbs.) 1,166 1,210
Shipping Weight - approx. (lbs.) 1,276 1,320
The specifi cations in this manual were current at time of publication, but because of our
policy of continuous improvement, JET, reserves the right to change specifi cations at any
time and without prior notice, without incurring obligations.
!
This means that if precautions are not heeded, it
may result in minor injury and/or possible machine
damage.
!
This means that if precautions are not heeded, it
may result in serious or even fatal injury.
Familiarize yourself with the following safety notices used in this manual:
4.0 INTRODUCTION
This manual is provided by JET
®
covering the safe operation and maintenance procedures for a JET Model EHB-1018VM
or EHB-1018VMH. This manual contains instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide consistent,
long-term operation if used in accordance with the instructions as set forth in this document.
To Next Page
Loading...
