To Next PageTo Next Page
Need help?Do you have a question about the Jet JWSS-22B and is the answer not in the manual?
Provides critical warnings and precautions to prevent injury during operation.
Lists all items included in the saw's packaging for unpacking and verification.
Lists necessary tools for assembling the scroll saw and its accessories.
Instructions for removing protective coating and inspecting for damage.
Guidance on the correct and incorrect methods for lifting and moving the scroll saw.
Procedures for securely installing the scroll saw on a workbench or optional stand.
Step-by-step guide for assembling the optional steel stand for the scroll saw.
Information on how and where to store spare saw blades on the machine.
Instructions for connecting and using the foot pedal for saw operation.
Essential safety guidelines for properly grounding the scroll saw to prevent shock.
Recommendations and guidance on using appropriate extension cords for the saw.
How to adjust the arm tilt for beveled cuts, including locking mechanisms.
Step-by-step instructions for inserting and securing the saw blade into the chucks.
Procedures for setting and adjusting the proper tension for the saw blade.
How to adjust the hold-down device for securing the workpiece during cutting.
Instructions on how to adjust the variable speed control for different cutting tasks.
Guide on how to check and ensure the blade is perpendicular to the table.
How to adjust the blade's oscillation for different cutting speeds and techniques.
Adjusting the mechanism to hold the arm in a raised position.
How to position the dust blower nozzle for optimal dust clearing.
Provides advice for efficient and safe operation of the scroll saw.
Explains how to turn the saw on and off, with or without the foot pedal.
Step-by-step guide for performing a typical cutting operation on the scroll saw.
Instructions for cleaning and preserving the scroll saw to ensure longevity.
Guidance on applying grease to moving parts for smooth operation.
How to check and replace the saw's fuse for overload protection.
Procedure for inspecting and replacing worn carbon brushes in the motor.
Explains how blade width affects cutting different types of lines and curves.
Details the importance of teeth per inch (TPI) for cutting speed and smoothness.
Describes the tooth set and its impact on cutting ease and blade movement.
Discusses different blade materials and their properties for cutting.
Illustrates and explains various tooth shapes and their cutting characteristics.
Provides a detailed list of parts for the upper and lower arm assembly.
Lists all components for the table and cabinet section of the scroll saw.
Catalog of parts for the drive link mechanism of the scroll saw.
Parts list for the optional steel stand accessory for the scroll saw.
General
